Blog

1) The model, specifications and specifications of the fittings must comply with the current national standards and relevant regulations, and also mat

Metal stamping parts are widely used in various fields of our lives, including some electronic devices, auto parts, decorative materials, etc. The har

1. There are scratches on the metal stamped parts. The main reasons for scratches on parts are: sharp scratches on the mold or metal dust getting into

1. The material is high strength and light weight. Stainless steel turning parts have high strength and high modulus of elasticity. Compared to concre

1. Turning is mainly used for machining rotating parts and machining internal and external cylindrical surfaces, end surfaces, conical surfaces, formi

At present, the two most common processing methods for turning parts are turning and stamping, but turning is more complex in terms of process accurac

When turning parts, it is necessary to achieve the required accuracy at the lowest possible cost. When designing parts, the focus is on reducing the a

Reasons for punch breakage and chipping in stamping production: 1. Caused by chip jumping, chip blocking, mold jamming, etc. 2. Incorrect feeding, cut

advantage: Turning can produce round-shaped products. In addition, since the cutting is carried out while the material is rotating, high dimensional a

Turning is mainly used for machining complex parts such as cylindrical, conical, spherical and smooth curved surfaces. These parts are not only the us