-
Stages of oxidative surface treatment when processing stainless steel on CNC machinesMar 22, 2024CNC machined stainless steel parts can be oxidized to improve their appearance and corrosion resistance. Here are the detailed steps: Preparation: Pre
-
Guide to CNC Machining of Metal PartsMar 21, 20241. Selection of material 1.1 Material properties. Select metal materials suitable for processing based on hardness, strength, thermal conductivity, an
-
Precautions when processing metal stamped partsMar 20, 20241. Reform the process, forms and work methods to implement manual operations outside the form. In terms of mass production, we can start by reforming
-
Why do metal stamped parts twist and twist?Mar 19, 2024The shape of the stamped parts is formed in a progressive die by stamping the remaining material around the stamped parts. The main reason for rotatio
-
Why do metal stamped parts crack?Mar 18, 20241. Local tensile stress is too high. During the processing process, due to excessive local tensile stress, metal stamping parts are subject to interna
-
Design principles for metal stamped parts.Mar 17, 2024In our life, we often use metal stamped parts. What are the design principles of metal stamped parts? Let's look at them in more detail below. ⑴ The m
-
Methods for improving the quality of metal stamped parts.Mar 16, 2024(1) Improve process methods In the drawing direction, try to make the contact area between the punch and the workpiece as large as possible, use a rea
-
Factors affecting the quality of metal stamped parts.Mar 15, 2024(1) Chemical composition of metals Pure metals have better ductility than alloys. Impurity elements usually cause brittleness and reduce ductility. Di
-
Common Problems and Reasons for Machining Metal Stamped PartsMar 14, 20241. Burrs: The remaining material is not completely left during the stamping or corner cutting process, and burrs are formed under the cutting surface
-
What are the advantages of metal stamping parts?Mar 13, 2024The quality of metal stamping parts is as follows: 1. Metal stamping parts are made by stamping method with low material consumption. The parts are li
-
Maintenance of metal stamped parts to prevent rust and corrosion.Mar 12, 20241) The model, specifications and specifications of the fittings must comply with the current national standards and relevant regulations, and also mat
-
What are the categories of processing technologies for metal stamped parts?Mar 11, 2024The processing technology of metal stamped parts can be broadly divided into two categories: separation process and forming process. The separation pr












