Products Description
|
1. Instrumental material |
|
|
|
Stamping holder |
45# |
|
|
Perforation plate |
45# |
|
|
Stamping material |
1.2363, alternative: HITACHI SKD11 |
|
|
Removable plate material |
1.2312, alternative: Chinese SKD11 |
|
|
Support plate |
CR12 |
|
|
Stamp holder |
45# |
|
|
Die plate |
Chinese SKD11 |
|
|
Stamp insertion |
1.2363, alternative: HITACHI SKD11 |
|
|
2. Thickness specification for each plate |
||
|
Stamping holder |
50mm |
|
|
Stamp holder |
60mm |
|
|
Removable plate |
25mm |
|
|
Support plate |
20mm |
|
|
Die plate |
40mm |
|
|
Perforation plate |
25mm |
|
|
3. EU stamping machine specification? Form closing height? |
||
|
No need, EU machine is good for mold. |
||
|
4. LS WEDM or HS WEDM for puller, mold, stamping? |
||
|
L.S. |
||
|
5. Mold life cycle |
||
|
3-millionth cycle. |
||
|
6. Technical detail |
||
|
- Guide pin size, the larger the better, preferably at least 5mm. - Please note how to ensure that the component can fall in the last step. - The tool should be automatic, without additional manual resources. |
||
|
7. The screw must be metric, not inch, with the exception of the mounting rod mentioned above. |
||
|
8. The coil width tolerance must meet the following requirements. |
||
|
For thickness For thickness > 3mm the tolerance is +0.3mm. |
||
Hot Tags: progressive stamping, China progressive stamping manufacturers, factory